Water Tank 150L
Etch Primed and Painted in two-pack PPG paint. This all AUSTRALIAN made aluminium tank to be fitted in your required space.
PART NUMBER: PWS03
Water Tank 200L
Etch Primed and Painted in two-pack PPG paint. This all AUSTRALIAN made aluminium tank can be left unpainted if required.
PART NUMBER: PWS04
Water Tank 300L
Etch Primed and Painted in two-pack PPG paint. This all AUSTRALIAN made aluminium tank is our largest model.
PART NUMBER: PWS08
High Mount Brackets
Blasted, Primed and Painted, these high mount water tank brackets are placed on the pedestal above your gear-drive.
PART NUMBER: WB01
J-Brackets - Stainless
Two J-Brackets in black comes with stainless steel strap, used for attaching your water tank to the driver's side of your chassis.
PART NUMBER: WB03
J-Brackets
Two J-Brackets in black used for attaching your preferred water tank to the driver's side of your chassis.
PART NUMBER: WB02
High Mount Bracket Straps
High Mount Tank Bracket Straps used to secure your preferred tank size above the gear-drive pedestal.
PART NUMBER: WB08
Remote Fill
Remote fill, primarily used for high mount water tanks, however can be used on J-bracket mounted tanks.
PART NUMBER: PWS18
Ball Valve 1/2"
A half inch ball valve is a valve used for opening or shutting off pressurised water to the water gun setup.
PART NUMBER: PWS19
Ball Valve 1"
A one inch ball valve is the most commonly used valve for opening or shutting off pressurised water.
PART NUMBER: PWS01
Ball Valve 1 1/2"
A one and a half inch ball valve is used for filling the low mount water tank fitted onto the side mounted j-brackets.
PART NUMBER: PWS02
Ball Valve 2"
A two inch ball valve is used for filling the low mount water tanks fitted onto side mounted j-brackets.
PART NUMBER: PWS23
3-Way Valve 1/2"
The half inch, three way valves are used for opening and shutting off pressured air to a remote fill water tank system.
PART NUMBER: PWS06
3-Way Valve 1"
One inch three way valves are used for opening and shutting off pressured air to a remote fill water tank system.
PART NUMBER: PWS25
3-Way Valve 1 1/2" - 2"
Both three way valves are used for opening and shutting off pressured air to a remote fill water tank system.
PART NUMBER: PWS20/PWS21
Pressure Regulator
The pressure regulator regulates pressure to the water tank so that it's a completely pressurised vessel.
PART NUMBER: PWS15
Hold Back Valve
The hold back valve's primary use is to hold back air pressure from the truck's air tank to the pressure regulator.
PART NUMBER: PWS13
Relief Valve
When pressure in the water tank builds up too much, the relief valve is designed to automatically release the excess air.
PART NUMBER: PWS17
Water Gun
Our aluminium slump water gun, made in Australia, built to last and used to wash down the rear of your truck.
PART NUMBER: WA08
Water Hose Black
Black 1" stiffened water hose, available in per metre lengths, used primarily for all water systems in your agitator.
PART NUMBER: WA01
Water Hose Yellow
Yellow 1" stiffened water hose, available in per metre lengths, used primarily for all water systems in your agitator
PART NUMBER: WA09
PVC Elbow Fittings
White 90° - 1" PVC Elbow Fittings, used for transfer of water throughout the various applications on your mixer.
PART NUMBER: WF22
Brass Hose Tail
1" Brass hose tail can also be used for transfer of water throughout the various applications on your mixer.
PART NUMBER: WA02
Hose Clamps
Hose clamps are used throughout the mixer on your water hose to secure any of the fittings around your agitator.
PART NUMBER: WA03
Round Water Meter-Pipe
Round water meter comes with pipe attachment and calculates litres used through the slump gun and sneaky hose.
PART NUMBER: WM09
Square Water Meter-Pipe
Square water meter comes with pipe attachment and calculates litres used through the slump gun and sneaky hose
PART NUMBER: WM07
Round Water Meter
Stand-alone round water meter calculates the amount of litres used through the slump gun and sneaky hose.
PART NUMBER: WM06
Square Water Meter
Stand-alone square water meter calculates the amount of litres used through the slump gun and sneaky hose.
PART NUMBER: WM10
Dead Man's Valve
The Dead Man's Valve (also know as the spring loaded ball valve) is another valve option for the sneaky pipe line.
PART NUMBER: WF31
One Way Non Return Valve
Our 1" one way non-return valve is primarily used for our remote fill high mount water tank system.
PART NUMBER: PS14
1" Galavised Nipple
Our 1 inch galvanised nipple can be incorporated in any of our water systems throughout our agitator.
PART NUMBER: WF14
