Danfoss Motor 55cc/75cc
Two styles of Danfoss motors linking your gear-drive and hydraulic pump with a high quality Australian made product.
PART NUMBER: HGM9002/HGM9003
Danfoss EDC Hydraulic Pump
The Danfoss 90 Series EDC Hydraulic Pump is the workhorse of our range of agitators linking the PTO with the drive-shaft.
PART NUMBER: HGM9006
ZF3301 - Gear-Drive
The ZF3301 range of gear-drives is used for all our agitators up to a 6.5mᶾ sized barrel, coupled directly to a hydraulic motor.
PART NUMBER: HGM12
ZF4300 - Gear-Drive
The ZF4300 range of gear-drives is used for all our agitators above 6.5mᶾ sized barrels, coupled directly to a hydraulic motor.
PART NUMBER: HGM13
ZF CML10/CML12
The ZF CML10 is used for 7.5m and 9.0m mixers, the CML12 for semi-trailer mixers. Both have built-in hydraulic motors.
PART NUMBER: HGM15/HGM16
Bonfiglioli Trasmital 575/577
The Trasmital 575 are used for mini-mixers, the 577s are used for 6.5 and 7.5 mixers. Needs to be coupled with a hydraulic motor.
PART NUMBER: HGM10/HGM11
Adapter Flange
The adapter flange sits between your hydraulic pump and drive shaft to give you a perfect fit and smooth operation.
PART NUMBER: HFD02
Slump Gauge
The slump gauge is a pressure gauge tapped into the high pressure port on the hydraulic motor, reading the slump thickness.
PART NUMBER: HSL09
Slump Line Kit
Our slump line kit contains all components connecting the slump gauge to the hydraulic motor. Includes gauge, line and fittings.
PART NUMBER: HSL12
Slump Line
The slump line is used to connect the slump gauge to the high pressure port on the hydraulic motor.
PART NUMBER: HSL11
Hydraulic Cylinder Ram 3.0"
Our 3" hydraulic cylinder ram's primary operation is to raise and lower the swivel chute during the concrete discharge.
PART NUMBER: CCP38
Manual Chute Jacks
We offer two sizes of manual chute jacks, one being the Maxi 13" (CCP21) and the other being the Mini version (CCP24).
PART NUMBER: CCP21/CCP24
Oil Cooler (core only)
Just the oil cooler without the fan. The oil cooler is a transfer of oil vessel with a thermo fan attached that cools the oil.
PART NUMBER: HRC06
Thermo Fan - 12v/24v
We stock both 12 volt (CTE38) and 24 volt (HFD28) stand alone cooler fans. ALL japanese trucks use the 24 volt version.
PART NUMBER: CTE38/HFD28
Thermo Fan Cooler Kit
The Thermo fan cooler kit contains both the oil cooling core and attached fan, either the 12 volt or 24 volt version.
PART NUMBER: HRC12
Oil Reservoir
The Davcron oil reservoir is used to hold hydraulic oil. It comes with the Breather Cap and Sight Glass to check oil levels.
PART NUMBER: HRC08
Spin on Hydraulic Oil Filter
Davcron's spin on hydraulic oil filter is used to filter the hydraulic oil coming out of the reservoir from all contaminents.
PART NUMBER: HRC04
Filter Head Assembly
The oil filter housing is used to support the spin on oil filter and it has a vacuum oil pressure gauge.
PART NUMBER: HRC02
EDC - Danfoss
Our Electrical Displacement Control units are sold separately to replace non-working EDC's that come off a workable pump.
PART NUMBER: HGM9005
Chute Raise/Lower Solenoid
Our chute raise lower solenoid once hosed up is the primary control unit for chute ram cylinder (up/down).
PART NUMBER: EH01
Solenoid Kit
The solenoid kit contains the solenoid plus the c-top valve, plus the two electrical fittings and four hydraulic fittings
PART NUMBER: EH02
